How To Turn Off The Blinking Clean Light On Mr Coffee

What Does The Clean Light On Mr Coffee Mean?

Tips To Turn Off The Blinking Clean Light On Mr Coffee

If unplugging and plugging the machine back in doesn’t do the trick, you need to run a deep-clean cycle. The following steps are a quick summary of what you’ll need to do to clean your Mr Coffee machine:

Your Guide To A Thorough Cleanup Of Mr Coffee Machines

For starters, it’s a good idea to read through the manual to determine the manufacturer’s suggestion for addressing the cleaning light.

But, what if you try maintenance their way and the clean light is still on? How do you turn off the blinking clean light on Mr Coffee?

Here is what you should do for a comprehensive cleanup of your coffee machine.

Turn Off The Blinking Clean Light On Mr Coffee With Proper Daily Cleaning

It may take some time to get used to, but practice these steps as part of your everyday routine. A regular cleaning routine will ensure your machine stays in tip-top shape.

Step 1: Carafe Cleanup

Pour out residual coffee and thoroughly rinse the carafe with water and some dish soap. Leave it to breathe for a minute or two, then flush out with clean water.

If you see some stubborn stains, use warm water, baking soda, and an abrasive sponge to wipe them clean. Now dry out the carafe, and it’s ready for use.

Step 2: Cleaning The Filter Basket

Open the lid to access the filter basket, and pull it out. Remove all contents from within the basket and put it underneath the tap to rinse away any contaminants.

A little dish soap-based solution will have the filter basket looking good as new. Now rinse the filter basket and reinsert it.

Step 3: Cleaning The Mr Coffee Lid

The lid on your Mr Coffee machine keeps a considerable amount of heat inside the machine. This heat may result in a layer of deposits and stains on the inside.

Also, the lid has spray heads that deliver coffee to the grounds—clean it using a sponge or soft cloth. Make sure that you don’t put too much pressure; you wouldn’t want your expensive machine to get scratched up.

Step 4: Spout Cleanup

Coffee gets delivered to the carafe by passing through a spout. To get that perfect taste every time, make sure to keep the spout as clean as it can be.

Take out the carafe and use a dish soap solution and a rag and sponge to clean the spout. Ensure that it’s not hiding any deposits. Once done, rinse with water and put everything back in its place.

Step 5: Polish The Outside Of Mr Coffee

After finishing your clean routine, use a soft cloth or clean sponge to polish the outside. This step also requires you to clean the integrated display and the base of the Mr Coffee Machine. Finally, just wipe away all the water that is left behind.

Turn Off The Blinking Clean Light On Mr Coffee With A Deep Cleaning

With prolonged usage, many impurities can form within the machine. These impurities include hard water deposits and the formation of bacteria, yeast, mold spores, and other contaminants. Read through this piece to know how to distinguish between hard water versus soft water.

Therefore, apart from the daily cleaning ritual, also practice a monthly regimen. Here is what you need to do:

Step 1: Switch Off The Mr Coffee

First, switch off the Mr Coffee machine and remove its cord. Let it sit for a bit. Make sure that all required supplies such as soap, white vinegar, and water are at arm’s length.

Step 2: Carafe Cleanup And Filter Replacement

Your machine’s carafe may have some left-over coffee — empty it, and then do the same for the filter. Use mild dish shop or any other cleaning solution, hot water, and a sponge to clean both parts. Replace the filter if necessary.

Step 3: Water/Vinegar Solution

As stated earlier, mineral buildups are a result of prolonged water usage. To rid your coffee machine of them, use a water/vinegar solution to clean.

Use a measuring cup to make a 50/50 solution. Then pour it into the water container and let it sit for a while.

Step 4: Self-Cleaning

With the solution still inside the Mr Coffee machine, insert a new filter in the basket. Let the carafe rest in the warming tray.

Now, press and hold the “Select” button on the coffee maker to initiate self-cleaning. It should take up to an hour, so you can carry one with other work and come back when purification is complete.

Step 5: The Final Rinse To Turn Off The Blinking Clean Light On Mr Coffee

Remove the filter from the filter basket, and pour out the vinegar solution from the carafe. Now, top the reservoir with clean water and being a brew cycle. Once the brew is complete, empty all water and thoroughly rinse the carafe.

Here is a detailed piece on how to get rid of hard water stains so your carafe will always shine like it’s brand new.

Can’t Turn Off The Blinking Clean Light On Mr Coffee? Check The Warranty

If you can’t turn off the blinking clean light on Mr Coffee after following the above steps, check the warranty. If the coffee maker is still under warranty, then apply for a claim.

Typically, Mr Coffee units feature a year’s worth of coverage. However, if the warranty period has passed, you might want to consult a professional to fix your machine.