Ring Doorbell Flashing Blue? (Possible Causes & Fixes)

The Ring doorbell is proving to be a popular addition to the variety of smart home security measures in modern homes. Each unit comes equipped with both a doorbell and camera, allowing homeowners to see visitors at their door.

There is also a circular light on the front portion of the Ring doorbell. The light is handy because it gives you quite a bit of information about what is going on with your Ring doorbell. If you are not familiar with it, though, it can be confusing. Flashing happens in various ways. It can mean a successful setup, a reboot, or a factory reset depending on the timing and pattern of the flashing light.

There are a whopping seven different patterns in which the blue light on the Ring doorbell will appear. There are subtle differences in some of these patterns, so it may take you a minute to realize which one is which.

Most of the lights indicate some sort of setup feature. Flashing on and off briefly usually indicates that the Ring doorbell is either starting up or in the middle of a reboot. When the blue light flashes and then moves up, it is an indication that the device is attempting to connect to the Wi-Fi.

Other times, you may see the top half of your ring flashing. When that happens, typically in the setup, it indicates that the password you entered for the Wi-Fi is incorrect. For the Ring Pro version, it is also an indication that the unit’s built-in battery has completed the initial charge.

The most common reason for flashing blue lights on your Ring doorbell comes during the initial setup. When the Ring doorbell is in its initial setup mode, the ring light will spin instead of flashing. That changes with the various setup options.

When the light changes to a flashing pattern that moves upward, it indicates that the doorbell is attempting to connect to your home’s Wi-Fi network for the very first time. When you put the wrong password in through your app, then only the top half of the light will flash. You have to re-enter the password in order to complete this portion of the setup.

When you have successfully completed setup, there will be four flashes of blue followed by a white circle. That is your signal that the Ring doorbell is ready to go.

Past the setup, there are times where your Ring doorbell may randomly flash. The most common reason for a steady flashing of the blue light indicates that there has been a reboot or an automatic firmware update. It is not uncommon for the Ring doorbell to reboot from time to time, like when it loses connectivity.

If you notice your Ring doorbell rebooting repeatedly, it can be indicative of a larger issue. Make sure that you charge the doorbell at regular intervals to prevent this issue. You can also hardwire the doorbell to ensure that there are no charging issues. Just make sure that the wires are secure, protected, and undamaged when hardwiring.

Should you notice your Ring doorbell blinking in one-second intervals, just wait. It is indicative that a restart is in process and it can take a few minutes before the device fully restarts.

The flashing blue light that you may see during charging can differ based on the model of Ring doorbell that you have. There is the 1st and 2nd generation option, the Ring 2 and 3, and the Ring Pro to choose from.

For the original Ring doorbells, they charge by connecting the charging cable into the doorbell’s back directly. When the light is flashing, it indicates charging. When the light turns into a solid blue, the battery has been fully charged.

For other battery-operated models, the battery is removable. When you remove the battery, it goes without saying that the lights will not display anymore until you replace the battery. This makes it more convenient come charging time.

For the Ring Pro, which is hardwired, it takes several hours of charging through those connected wires after the initial setup. The charging should begin as soon as the setup is done. With hardwired charging, the top half of the blue light should blink, turning off entirely when finished.

Due to the reliance on the LED lights to relay messages, it is of the utmost importance that you be able to see the light. The most common reason for this is that the sun’s glare is blocking out the LED lighting of the ring.

The easiest fix is to buy and install one of the anti-glare mounts available through Ring. The mount acts as a sort of awning for the Ring doorbell. Even better, it can help protect against light rain and give the device an extended life.

The mount sold through Ring is compatible with the Ring, the Ring 2, and the Ring Pro. If you are unable to get a mount, you might want to move the location of the Ring so that it gets less exposure to the sun.

The Ring Chime and Chime Pro comes with a circular LED light, but it is located in the upper right corner instead. These are a complement to the Ring doorbell and security cameras by extending the signal of your Wi-Fi network to create a more stable connection to the internet.

The light, much like the other Ring devices, indicates the status of the device. When it is solid bleu, the Ring Chime is working fine. No light indicates that it is not getting power, and a blinking light indicates something else entirely.

When the LED light is flashing, it is usually indicative of one of a few things. The device is either in setup mode, rebooting, reconnecting to the Wi-Fi, or installing an automatic update.

Just understanding the various meanings behind blinking lights can be enough to learn as a Ring doorbell owner. There are a few pertinent questions that users have about their Ring doorbell. Here are some of the most relevant questions.

For the most part, your Ring doorbell will flash blue in one way or another. And for the most part, flashing blue lights are totally normal. But what happens when you notice flashing red lights from your Ring doorbell?

The red light is an indicator of issues with the Ring doorbell. It is also there to let you know that a certain function has been activated. There are really two red light indicators: solid/flashing or three red dots.

When you see a flashing or solid red light on your Ring doorbell, it usually means that the battery is low. Whenever you see a solid or flashing red light, charge it or replace the battery pack depending on the model of Ring doorbell that you have.

When the Ring doorbell is charging, it should switch over from the red light to a blue circle that is filling up.

More often than not, however, you will probably see three red dots on your Ring doorbell. The good news is that the three red dots are totally normal. They appear at night, indicating that the doorbell is making use of the built-in IR night vision function. When you see three red dots, you can ignore them as your device is working properly.

There have been some notable concerns where security and the Ring doorbell is concerned. Yes, it allows you to see who is at your door, but there are issues with the Ring doorbell being hacked from outside users.

People have reported on a frequent basis that outside users had been able to access their video even after the information and password have been changed. It also bears mentioning that if you have an open Wi-Fi network, your Ring will be susceptible to hacking.

Ring is working to upgrade its security, but it has led to some uncomfortable moments from ring users. More often than not, it is friends or family messing with someone they love. The unfortunate news is that there have not been any updates from Ring themselves about this issue, so it remains to be seen if the issue has been corrected.