Can A Queen Mattress Fit On A Full Bed Frame? (Find Out Now!)
A high-quality mattress and bed frame can make the difference between a good night’s sleep and an achy back. Unfortunately, pairing a mattress with a bed frame that’s too small won’t provide the mattress with the support it needs. So if you have both a queen mattress and a full bed frame on hand, do they fit together well?
Although you can place a queen mattress on a full bed frame, it will not fit properly and isn’t recommended. A rule of thumb is that a bed frame should be the same size or slightly larger than the mattress. Putting a queen mattress on a full bed frame will reduce its comfort and support and can cause back pain.
Do You Need an Interior Decorator?
Get free, zero-commitment quotes from pro contractors near you.
What Is The Size Of A Queen Mattress?
A standard-size queen mattress measures 60 inches wide by 80 inches long. This means that a queen mattress is five feet across and six and two-thirds feet long.
The depth of a queen mattress can vary quite a bit depending on the type of mattress. The typical range starts at eight inches deep and goes up to eighteen inches deep. There is no standard mattress depth.
Queen mattresses are the most common mattress size. They’re generally preferred by couples and individuals who prefer plenty of space while sleeping. Generally, the frame for a queen bed should be the same size or a bit larger than the mattress itself.
What Is The Size Of A Full Bed Frame?
A full bed frame measures 54 inches wide by 75 inches long. In feet, that’s four and a half feet across and six and a quarter feet long.
Will A Queen Mattress Fit On A Full Bed Frame?
A queen mattress measures 60 inches by 80 inches, and a full bed frame measures 54 inches by 75 inches. As you can tell, the queen mattress is significantly larger than the full bed frame. The queen mattress is six inches wider and five inches longer than the full bed frame.
So, can you put a queen mattress on a full bed frame? It’s possible, of course, but it’s definitely not optimal. If the queen mattress is perfectly centered, three inches of the mattress will hang off each side of the frame.
Removing The Footboard
Another factor to consider is whether the full bed frame has a headboard and footboard. If you want to put a queen mattress on top of a full bed frame, the footboard will have to go. This is because the queen mattress will extend five inches past the end of the frame.
Consequences Of Queen Mattress On Full Bed Frame
Placing a queen mattress on a full bed frame isn’t ideal. Remember, a bed frame should be the same size as the mattress or even slightly larger. Otherwise, it won’t provide proper support for the mattress.
When you put a queen mattress on a full bed frame, you sacrifice both support and comfort. Putting any mattress on a frame that is too small can lead to back pain and even sleep problems. Unfortunately, there are no benefits to putting a queen mattress on a full bed frame.
Do You Need To Use A Bed Frame?
You may be wondering whether a bed frame is really necessary. Maybe you’re considering just putting your mattress on the floor and calling it a day. Well, let’s go over some of the benefits of bed frames before you make up your mind. You might decide that you want one after all!
Support And Protection
Bed frames hold your mattress up off the floor and provide it with plenty of support. While you can place your mattress directly on the floor, it’s not recommended. This is because it’ll be exposed to much more moisture and dust mites.
Consistent moisture can decrease your mattress’s lifespan. In addition, the increased amount of dust mites from keeping your mattress on the floor can exacerbate allergies.
Warranty Requirements
When you purchase a mattress, the warranty will typically require you to keep it on a frame. Otherwise, you’ll void the warranty.
Standard Mattress And Bed Frame Sizes
Here we’ll cover each of the standard mattress and bed frame sizes, plus a few details about each mattress type. The mattress sizes are listed below from smallest to largest.
Twin
Twin beds and their frames measure 38 inches by 75 inches. They’re just over three feet wide and six and a quarter feet long. The recommended room size for a twin bed is at least seven feet by ten feet.
Children and adults who sleep alone are the most common users of twin beds. Kids usually transition to a twin-size mattress around the age of three or four.
Twin XL
A twin XL mattress is the same width as a traditional twin–38 inches–but it’s a bit longer at 80 inches. Therefore, twin XL mattresses and frames are a bit wider than three feet, and they’re six and two-thirds feet long. A room should be at least ten feet by ten feet to fit a twin XL mattress properly.
Twin XL mattresses are recommended for single sleepers who are taller in stature. Generally, those who are at least six foot three should get a twin XL mattress. College dormitories often have twin XL mattresses.
Full/Double
Full or double beds are actually the same thing, and they measure 54 inches by 75 inches. Therefore, full mattresses and their frames are four and a half feet across and six and a quarter feet long. The recommended room size for a full or double mattress is ten feet by ten feet.
The full or double mattress size is often used in guest rooms. It’s usually a bit too small for couples to sleep comfortably together, but it’s a great size for individual sleepers.
Queen
A queen bed and its frame, as we’ve gone over previously, are 60 inches by 80 inches. That’s five feet across and six and two-thirds feet long. To fit a queen bed, a room should be at least ten feet by ten feet in size.
Queen beds are great for couples and for individual sleepers who prefer plenty of space. Queen mattresses are the most common mattress size.
King
King beds and their frames measure 76 inches by 80 inches. In feet, that’s six and one-third feet across and six and two-thirds feet long. The recommended room size for a king bed is 12 feet by 12 feet or larger.
Best suited for couples, a king bed is essentially the size of two twin XL mattresses pushed together. It’s often considered the ideal mattress size for master bedrooms. However, for individuals, a king bed is often a bit too large.
California King
The largest mattress size (and corresponding bed frame size) is the California king, which is 72 inches by 84 inches. It’s narrower than a regular king at six feet wide, but it has more length at seven feet long. To fit a California king bed, the room should be at least 12 feet by 12 feet.
California king beds are best suited for taller people. They can also be the perfect size for narrower rooms, thanks to their slightly slimmer profile.
Do You Need an Interior Decorator?
Get free, zero-commitment quotes from pro contractors near you.
Related Questions
Will a queen mattress fit in a truck bed?
Most truck beds should be able to fit a queen mattress. There may be a select few short bed trucks that can’t fit a queen mattress. In general, though, a queen mattress will fit in the average truck bed.
Is a queen mattress bigger than a king?
No, a queen mattress is smaller than a king. A queen mattress typically measures 60 inches by 80 inches. Meanwhile, a king mattress measures 76 inches by 80 inches.
What is queen mattress size?
A standard queen mattress is 60 inches by 80 inches. It is five feet across and six and two-thirds feet long.
With a lifelong passion for writing plus strong enthusiasm for home improvement and DIY projects, joining the team at Upgraded Home was an easy choice. Jessica Allen likes to share helpful information with current and aspiring homeowners. Aside from writing, Jessica loves doing yoga, playing the piano, and dabbling in graphic design.
More by Jessica Allen
