How To Get Fresh Or Dried Blood Out Of Carpet (6 Ways To Do It!)

Benjamin Wright
by Benjamin Wright

Getting blood stains on your carpet can be a very problematic experience. Whether you get a small or large amount of blood on the carpet, it can have a staining effect which can seem quite irremovable at first. Fortunately, however, there are a few surefire ways to clear up the mess.

With everyday products from your bathroom or kitchen pantry, you can get rid of blood from your carpet. It is easier when the blood is fresh, but even if it dries and binds to your carpet fibers, there is a good chance that you can get rid of the stains. You can do this with vinegar, ammonia, salt, or cold water.

Do You Need Carpet Cleaning Services?

Get free, zero-commitment quotes from pro contractors near you.

Method 1: Dish Soap to Get Blood Out of Carpet

A combination of one tablespoon of dish soap and two cups of water will often work well as a cleaning solution. Sprinkle the solution all over the stain and blot on the area with a soft wet cloth. Make sure the cloth is lint-free and clean so as not to complicate the problem.

Keep blotting until the stain is eradicated. Pour a little cold water on the freshly cleaned area to get the soap out. Then, dry the area with another fiber-free cloth. Ensure that the carpet dries completely before walking on it again.

Method 2: Remove Blood from Carpet with Ammonia

To remove either dried or fresh blood stains from your carpet, mix 2 tablespoons of ammonia inside a cup of warm water. Then, dip a clean lint-free cloth inside the mixture and dab the solution to the stained area until the blood comes off the carpet.

After the stain has been considerably reduced, put a towel in cold water and dab on the carpet to rinse off the ammonia. Allow the carpet to dry thoroughly after the cleaning is finished. Ammonia works for many kinds of carpet.

If the stained carpet has synthetic fibers, you can try a mixture of 1 tablespoon of ammonia and 4 ounces of cold water. Soak the stained carpet area with the solution and let it sit for about 5 to 10 minutes.

Then, gently blot the stained spot with a soft sponge. You will see the blood begin to separate and come out of the fibers. Continue blotting until every bloodstain comes out.

Method 3: Remove Blood Stains from Carpet with Salt

Create a thin paste with salt and cold water. Apply the paste onto the bloodstained area and leave it to sit for about 20 minutes. This should be enough time for salt’s dehydrating properties to break down the blood, making it easier to remove.

After the 20 minutes have come to an end, gently scrub the carpet until the stains are out. Then, rinse off the treated carpet area by dabbing with a clean cloth dipped in cold water. After this, allow the carpet to dry.

A method similar to this is the use of cornstarch. It is gentler on your carpet fibers, too. To do this, make a paste with cornstarch and apply it over the stained area. Let the paste dry and gently scrub with a toothbrush. Rinse, and leave it to dry thoroughly.

Method 4: Vinegar to Remove Blood from Carpet

Vinegar is one of the most common everyday items used in the removal of stains. It is used to get rid of the most stubborn stains, blood included. If you want to get dried blood out of your carpet, try a mixture of one-part vinegar and one-part water.

Wet the carpet area with the mixture and leave it to soak for 30 minutes. Afterward, blot with a soft, clean sponge that has been soaked in the solution. Be careful not to spread the stains; blot till the blood is out. Then, rinse and air dry.

Another effective way you can use vinegar to get dried blood out of carpets is by combining it with warm water and baking soda. Mix a half-cup each of vinegar and warm water with four tablespoons of baking soda.

Pour the mixture into a spray bottle, spray over the stained area and allow the mixture to sit for 15 minutes. Blot the carpet area with a soft sponge and rinse with a clean, lint-free cloth. Allow the carpet to dry.

Method 5: Hydrogen Peroxide to Remove Blood from Carpet

When it comes to stains, hydrogen peroxide, like vinegar, is a particularly useful spot cleaner. With the right amount of the chemical substance on your bloodstained carpet, you can make tough stains vanish in minutes.

However, hydrogen peroxide can be very harsh on some carpets. So, before you use it on your carpet, apply a few drops on a hidden area first to see how it reacts. If that area loses color after a few minutes, do not use it on the stained spot.

On the other hand, if you do not see color changes or fading, you can apply the hydrogen peroxide to the stained area of the carpet. You can do this with a cotton swab. After about an hour, scrub the area with a soft toothbrush.

Then, rinse with a wet cloth and air dry. Better still, you can vacuum the area to get out more of the residue of blood and hydrogen peroxide. This often helps restore the original texture of the carpet fibers.

Method 6: Meat Tenderizer to Remove Dried Blood From Carpets

Meat tenderizers contain chemicals that break down dried blood, making it easier to remove the bloodstains. However, you must make sure that you are using the unflavored type as the flavored ones could cause new stains.

Combine one-part water and one-part unflavored meat tenderizer and apply the mixture onto the stained spot. Let the solution settle in the carpet for about 30 minutes. Dab onto the blood stain with a clean, lint-free towel. Continue the process until the blood comes off.

Then, wash the area with a mixture of dish soap and cold water. Rinse with cold water and allow the carpet to dry. When it dries, vacuum to restore the texture of the carpet.

What Is The Easiest Way To Get Blood Stains Out Of My Carpet?

The easiest way to remove blood stains from carpet is to get started as soon as the blood drops on the carpet. The longer the blood sets in, the more difficult it will be to get rid of it. Fortunately, cleaning fresh blood off carpets does not require much.

If you are dealing with fresh blood, follow these simple steps:

Step 1: Blot with a clean lint-free cloth. Preferably, use a white cloth, so you do not get dye from the cloth on your carpet. Lightly press on the stains to clean out the wet blood. When doing this, you must be careful so the blood will not spread even further. A smart method is to dab from the edges to the center. Also, remember to blot, not scrub.

Step 2: Pour in cold water. You can pour cold water into a spray bottle and carefully spray over the stained area. This will help you apply the right amount of water as too much water can spread the stain on the carpet.

Step 3: Blot the wet spot dry. In a careful up and down motion, use a dry lint-free towel to dab the stained spot. Do not forget – dab, not rub.

Step 4: Repeat the process. Spray the stained area with cold water again and blot dry. Continue to repeat this process until the stain gets cleaned thoroughly.

Step 5: Dry the wet carpet. This step is essential. If the wet carpet does not dry on time, a tiny residue of blood can resurface on it. Therefore, you must speed up the drying process. You can take the carpet out in the sun to dry or blow a fan over it to dry quickly.

Does A Dried Blood Stain On My Carpet Require Professional Cleaning?

Carpets made with silk and wool are incredibly delicate and prone to damage. So, if you use such carpets, you might not want to risk a DIY approach on them.

A professional cleaning might cost more, but the results will often be better. Experts will study the extent of damage on your carpet and know how to clean it effectively.

Hiring a professional carpet cleaner can also save you time and energy. They will also administer the right kind of cleaning that will not damage your fibers.

Do You Need Carpet Cleaning Services?

Get free, zero-commitment quotes from pro contractors near you.

Related Questions

Does hot water work to get blood stains out of fabrics?

While trying to remove blood stains from any fabric, do not use hot water. Hot water will make the protein on the blood set, making it almost impossible to clean off. Warm water should be avoided too. Always use cold water for bloodstains.Coldwater is essential as it gets the dried blood to rehydrate. Even if the stain is not from blood, always use cold water for stain removal. If possible, use water in an ice-cold state.

How can I remove dried blood stains on my mattress?

A small amount of hydrogen peroxide will clear out any blood stains from your mattress in no time. However, if the stain has settled in for a long time, you will have to repeat the application. Scrub with a clean towel or brush. Let it settle in for a while.After this, scrub with a mixture of detergent and water. Be careful not to get too much water on the mattress as it takes a long time to dry.

Benjamin Wright
Benjamin Wright

Benjamin is a proud homeowner who loves to write about DIY projects and home improvement projects. Traveling, perfecting his home, and spending time with his family are just a few of the many things that keep him inspired.

More by Benjamin Wright