Kitchen faucets are crucial to the room’s functionality and use. The faucet delivers water for dishwashing, filling pots, providing drinking water, watering plants, and bathing little children and pets. To fulfill its function, every kitchen sink has a faucet built alongside it. Sometimes, the faucet malfunctions or needs to be replaced.
The typical cost of a monobloc, pull-down kitchen faucet in the United States is roughly $350, including installation. The price will depend on the type of faucet you install as well as if there are any other pieces that need to be replaced.
Faucets serve more than one purpose. They also add to the room’s aesthetic appeal. As a result, there are several considerations to be made while selecting a faucet. Some have an influence on appearance, while others have an influence on how the faucet and sink work. It’s critical to think about both your demands and the aesthetics of the room, choosing a faucet replacement.
Table of Contents
- Kitchen Faucet Replacement Cost
- Enhancement And Improvement Costs
- Additional Considerations And Costs
- What Affects The Cost Of Sink And Faucet Repairs?
- Materials And Finishes
- Installation Process
- How To Save Money On Sink Repair
- Related Questions
Kitchen Faucet Replacement Cost
|Average Cost Faucet Replacement|
|$85||$350||$120 – $400||$750|
It will cost on average about $350 to replace a kitchen sink faucet. However, there are many things that go into determining the price, but most people will pay between $120 and $400. This cost includes labor and materials. On the higher end, you may see costs as much as $750.
Kitchen Faucet Repair Cost
|Faucet Replacement vs. Repair|
|Replacement Cost||Repair Cost|
|$120 – $400||$50- $200|
The average cost of repairing a sink or faucet in the United States is $194. However, the typical range is between $50 and $200. The total cost will be determined by labor expenses, components required, the number of sinks or faucets that need to be repaired, the origin of the problem, and the length of time the problem has been present.
Enhancement And Improvement Costs
|Built-In Water Filter||$100 – $200|
|Old Faucet Removal||$50|
|Soap Dispenser||$25 – $50|
You may alter the angle of the spout or how the water emerges into the sink on certain higher-end faucets. This is less frequent, though it may be useful in large sinks or busy kitchens. For faucets with this function, expect to pay at least $300.
Built-In Water Filter
A built-in water filter is an option if your drinking water is of low quality. These filters your water directly at the sink and are installed underneath the counter. They are reasonably priced, starting at roughly $100.
Old Faucet Removal
The cost of removing an old faucet is usually included in the cost of the installation. However, if the old faucet is rusted or requires extensive repair, expenses might rise by as much as $50.
An in-counter soap dispenser is typical when a faucet is fitted. These cost between $25 and $50 and are simple to install.
Additional Considerations And Costs
There are several additional considerations you need to think about when you are pricing the cost of a kitchen faucet replacement, such as:
- Kitchen faucets are typically replaced every 7 to 10 years by most households. Not all faucets are compatible with your sink and surface. A new hole must be bored in the counter in certain circumstances, while in others, the holes must be covered with a plate. Before placing an order, double-check the setup and consult with your plumber to ensure that it will function.
- If your plumbing isn’t up to code, has leaks, or other problems, you may need to fix it first before installing a new faucet, or if your new faucet doesn’t work with your water supply, you’ll need to get a new one or have the supply modified. There are water-saving types available that utilize fewer gallons per minute if you want an environmentally friendly faucet.
- If you have a bigger faucet, a swivel faucet will allow you to reach more regions. Most monobloc or widespread deck-mounted faucets swivel, although bridge and wall-mounted faucets are more likely to be fixed. Most contemporary faucets with a pull-down spout contain an adjustable spray button. This comes at no extra cost and can help with sink cleaning.
What Affects The Cost Of Sink And Faucet Repairs?
|Additional Cost Factors|
|Clearing Pipes||$120 – $170|
|Clogged Drain||$150 – $200|
|Dripping Faucet||$65 – $150|
|Replace Sink Faucet||$150|
|Sink Installation||$150 – $400|
|Surface Issues||$100 – $200|
|Water Temp Repair||$300 – $3,500|
The entire cost of repairing your bathroom or kitchen sink will be determined in part by the sort of problem you’re having, any components required, and the amount of damage to your fixture and plumbing.
The average cost of a pipe repair project in the United States is $120 to $170. Expect to spend between $60 and $65 per hour for typical pipe repair. Expect to spend around $95 per hour if the project entails rebuilding sewage pipes.
Drains clog for a variety of reasons, not all of which start within your home. If more than one fixture (sink, tub, or shower) isn’t draining, the issue might be with the pipes connecting the fixture to the main sewage line or a branch line. Yard debris or overgrown tree roots can clog an exterior drain. Due to age, the outer pipe may be damaged or rusted.
Unfortunately, this implies that you may have to replace your pipes, which may raise your pipe repair prices. Replacing pipes between the sink and the wall is less expensive than cutting into the wall to repair broken pipes, which may cost up to $400 depending on the scope of the installation.
A plumber’s assessment and clearing of a clogged drain costs between $150 and $200 on average in the United States. For both kitchen and bathroom sinks, clogged drains are a typical issue. By pouring boiling water down the drain or using a plunger, you can try to fix it yourself.
Most plumbers advise against using drain cleaners with strong chemicals, such as Draino since they can erode pipes and discharge dangerous chemicals into the sewage system. The blockage in the drain may refuse to budge at times.
If you’ve attempted unsuccessfully to unclog a bathroom or kitchen sink, it’s time to call a plumber. They can pinpoint the source of the blockage and the most effective techniques to clear it without causing damage to your pipes.
Fix Dripping Faucet
The typical cost of repairing a leaky faucet is $65–$150; however, depending on the type and origin of the leak, the cost might be more.
Fortunately, this is a simple problem to solve. Tightening a stem screw or replacing a corroded valve seat or worn-out washer may be enough to remedy a faucet that drips at the spout.
Replacing Sink Faucet
It may be cheaper expensive to replace a defective sink or faucet rather than attempting to fix it in some circumstances. Before you sign off on a repair, inquire with the plumber about the cost of installing a new sink or faucet, as well as any other connected fees.
To replace your old faucet, expect to pay around $150 (or more, depending on the faucet style). Remember that the pricing does not include the cost of the replacement fixture. For installation, most plumbers charge a set rate or an hourly rate.
Sink installation might cost anywhere from $150 and $400, not including the cost of a new sink. The most basic model will cost $300. New sinks come in a variety of pricing ranges to suit any style or budget. What you spend depends on the brand, material, size, and kind. Drop-in, undermount, farmhouse style, standing bowls, and pedestal sinks are examples of sink types.
Some common materials are stainless steel, porcelain, and cast iron. Sinks are also available in more expensive materials like soapstone and hammered copper.
Sinks can also develop dents, cracks, and scratches over time, reducing their aesthetic attractiveness. The gauges on porcelain sinks can corrode with time. Resurfacing these imperfections will cost between $100 and $200.
Water Temperature And Pressure Repair
Dripping faucets and annoying drips aren’t the only problems you’ll face. When you initially turn on the faucet, it may splutter due to unbalanced pressure in your home’s plumbing. Your morning shower may be less than energizing due to low water pressure. While this may appear to be a problem with your faucet, it’s usually the result of something else, such as a plumbing issue or a water heater problem.
Water temperature concerns can be resolved by altering the water heater’s temperature. A clogged aerator screen can cause low water pressure from a sink faucet. To wipe away minerals or other deposits, homeowners may detach the aerator screen from the faucet. The water pressure might be low if the shutdown valves under the sink are not fully open.
A plumber can assess if your faucet problem is a simple remedy or the consequence of various problems in your home’s plumbing system. More severe problems with water temperature or pressure may need the replacement of the water heater, which costs between $350 and $3500 depending on capacity and kind.
Materials And Finishes
Most kitchen faucets feature a brass underbody, with ceramic or plastic pieces thrown in for good measure. Other materials and finishes can be used on the faucet’s exterior. Some have only a cosmetic influence, while others have an impact on the faucet’s longevity or cleaning ease:
There are three distinct neck or spout types available for kitchen faucets. The conventional neck rises a short distance from the base before straightening out. It may or may not have a spray head that can be pulled out.
For homeowners that have a lot of tall pots, the gooseneck is a popular choice. More items may be stored underneath the neck, and its reach, or swivel, is usually greater. It might also be equipped with a pull-down head.
In classic or farmhouse designs, the bridge is more attractive. It comprises of two pipes that connect in the middle at the spout, either reaching up from the deck or out from the wall. Bridge faucets come in a variety of shapes and sizes, but most have a Victorian neck that bends in two or three places.
One or two levers or handles may be used to operate your kitchen faucet. They can be installed next to the spout or on the same block as the spout. True levers, spokes, and discs are some of the types available.
Although this is primarily a personal preference, many persons with arthritis or difficulty using their hands may prefer the lever design. Your faucet might alternatively be touchless, with a button hidden in the sink cabinet’s toe kick that switches on the water.
A kitchen faucet can be found in one of two locations. In your countertop or sink, a deck-mounted faucet is fitted. It might be in the center or out to one side. Larger sinks may require a faucet in the center, whereas D-shaped sink basins function best with the faucet in the corner.
Wall-mounted faucets are fitted right behind your sink in the wall. They protrude from the wall and into the sink. Some feature a jointed spout that extends farther into a bigger sink, while others have a fixed and straight spout.
The size of a faucet varies greatly depending on the model. A monobloc faucet is a single-hole design with a faucet that extends 12 to 18 inches into the sink and is 12 to 18 inches tall.
The knobs on a broad faucet are 8 inches apart on the center, with the spout in the middle. It also reaches 12 to 18 inches into the sink and is 12 to 18 inches tall. Some faucets feature unique drillings, such as one with a single handle that rests on its own.
If you’re replacing a faucet, make sure the drillings match or choose a plate that covers the current counter drillings. Otherwise, the new counter may be drilled to suit the faucet of your choice.
Many homeowners opt to DIY installing a kitchen faucet since it is a very simple and uncomplicated operation. If you’re replacing an existing faucet, the first step is to remove it. Before removing the supply lines, turn off the water and unscrew the bolts that keep the faucet in place. The old faucet is then taken out from above, with the nuts removed from below.
The new faucet is installed in the opposite sequence of the old one. The replacement components are inserted from above and secured underneath the counter. Before the water is restored and checked, the supply lines are linked, and everything is tightened down. The procedure should take around an hour if all of the components are in good condition from start to finish.
A plumber can install a faucet in roughly an hour or two hours if the sink and drain are connected at the same time. Plumbers typically charge between $45 and $65 per hour, with most faucet installs costing approximately $50.
Depending on the finish of your kitchen faucet, several types of care are required. Anything may be used to clean chrome, plastic, and stainless steel. Other finishes necessitate the use of PH-neutral or metal-specific cleansers.
A PVD (physical vapor deposition) coating on your faucet makes it simpler to clean and prevents hard-water buildup and corrosion. This does not, however, mean that you should not use bleach on your faucet. Always check with the faucet’s manufacturer for cleaning instructions.
How To Save Money On Sink Repair
Sink repair often comes with faucet replacement, as one of the reasons your faucet may be falling is due to the poor condition of the sink. Therefore, we’ve thought it was relevant to share with you how you can save money on repairing your sink before installing your brand new faucet.
- Always double-check the warranty on your current sink or faucet. Some higher-end models provide substantial warranties that cover the fixture’s mechanics and finish. If you need to replace the sink or faucet, check with the manufacturer to determine if the repair is covered under your warranty.
- Retailers and kitchen and bath showrooms may provide professional discounts to plumbers. Compare the prices of a new sink or faucet to what you may get online or at home improvement stores if you need one. They might be able to negotiate a better price for you.
- Before you hire a professional, get free estimates on how much it will cost to remedy your plumbing issues. While it’s understandable that you’d like to get your kitchen faucet working again (you’ve got dishes to clean! ), You don’t want to overspend or be caught off guard by an unexpected expenditure (especially if you have a family to feed!).
Can a handyman change a faucet?
A handyman may do the majority of faucet replacements without the assistance of a journeyman plumber. Due to the fact that you’re working with water, you should always double-check for leaks within the first 24-48 hours. Of course, this would need the removal of the existing faucet.
Do I need a plumber to replace the kitchen faucet?
If you only need to change a faucet, you can do so yourself, but a general contractor or professional plumber should do any plumbing work.
Why is my kitchen sink leaking underneath?
The most typical cause for finding water underneath your sink is that your drain has a leak. Fractures in the plumbing lines underneath your sink can be caused by shifting plumbing lines, worn-out connectors, or even pipe rust, causing water to slowly and gradually seep out.